- COCON Roomserver
- COCON Roomconfigurator
- COCON MeetingManager
- Operator Application
- COCON Interpreter
- COCON Signage
- COCON Audio
- COCON Video
- COCON Nameplate
- Manuals , guides & datasheets
- Central equipment
- Confidea G3 - Wireless
Mount the Nameplate
To change the location of your nameplate, you can mount it as a portable unit. To use the nameplate in this mode, the mounting bracket (1) is already attached to the portable base (2).
Once attached, place the bracket and base so that the side closest to the cable opening, lines up with the backside of the nameplate. Click the nameplate onto the bracket.
Figure 1-53 How to mount the CoCon for portable use
To use the nameplate on a fixed position, first dettach the portable base from the mounting bracket. Tehn, install the nameplate on the table by attaching the mounting bracket to the table. Click the nameplate onto the mounting bracket.
Figure 1-54 How to mount the CoCon for fixed usage
Mount the side panels
Two different types of side panels are provided with the nameplate. Depending on the cabling of the nameplate you should use panel A or B as depicted in the figure below..
To easily switch the position of the nameplate you can place the cables through the opening on either side of the nameplate. In this case use the side panels A as depicted in the figure below. When fixating the side panels beware that the left and right side panel are different
If you use the fixed configuration and place the cables through the bottom opening into the table, use the side panels depicted in B as shown in the figure below.
Figure 1-55 How to mount the side panels of the Nameplate depending on the cabling. A. Standalone cabling, B. fixed cabling
To detach the nameplate from the mounting bracket (and bottom plate), use a flat screw driver or something similar. Insert the screw driver into the rectangular opening on the side of the nameplate base and press down.
Figure 1-56 How to detach the nameplate from the mounting bracket and bottom plate