avatar  


Recently viewed tickets

Log out

Descriptions of Major Functions

I would like to switch to IP-CAM 50
  1. Press [Camera 1 ~ 3] on the remote control to select IP-CAM 50.
  • Camera 1 ~ 3 is selected with IR SELECT.

I would like to save the current lens position data

  1. Hold [Preset + ID] on the remote control to save the current position data.
  • ID shall be a digit [0 ~ 9].
  • Use VISCA Command to store position data to [0 ~ 127]

I would like to clear the saved position data

  1. Hold [Reset + ID] on the remote control to clear the given position data.
  • ID shall be a digit [0 ~ 9].
  • Use VISCA command to clear position data stored in [0 ~ 127]

I would like to turn on the back light compensation function

  1. Press [Back Light] on the remote control to turn on or turn off the back light compensation

I would like to adjust the shooting angle of the lens

  1. Press [Tilt �?] or [Tilt ‚] on the remote control to adjust the angle upward or downward.
  2. Press [Pan „] or [Pan ƒ] on the remote control to adjust the angle to right or left.
  3. Press [Pan - Tilt Reset] on the remote control to reset the angle to the center point.

 

I would like to zoom in/out images

Adjust image size

  1. Press [Fast +] on the remote control to zoom in images.
  2. Press [Fast -] on the remote control to zoom out images.

Fine-tune image size

  1. Press [Slow +] on the remote control to zoom in images.
  2. Press [Slow -] on the remote control to zoom out images.

I would like to adjust the focal length

Auto tune

  1. Press [AF] on the remote control to adjust automatically.

Manual focus

  1. Press [MF] on the remote control to turn on the manual focus function.
  2. Press Focus - [+] or Focus - [-] to adjust.

I would like to adjust the AF speed

Adjust the AF Sensitivity

Triggering speed of focus. The higher the speed is, the faster focus is triggered

To shoot fast-moving objects, AF Sensitivity can be set to [High] or [Medium], which is applicable to quick focus.

When the environment is too dark to enable auto focus or fixed objects have to be shot in different brightness, AF Sensitivity can be set to [Low].

  1. Press [MENU] to activate the setting menu.
  2. Press [„] or [ƒ] to select [Auto Focus].
  3. Press [ENTER] to activate.
  4. Press [�?] or [‚] to select [AF Sensitivity].
  5. Press [ENTER] to activate.
  6. Press [„] or [ƒ] to select [High / Middle / Low].
  7. Press [MENU] to exit.

Adjust the AF speed

The focus speed upon triggering AF Sensitivity

  • [Normal] (default): Image flickering may not occur
  • [Fast]: Fast focus speed
  1. Press [MENU] to activate the setting menu.
  2. Press [„] or [ƒ] to select [Auto Focus].
  3. Press [ENTER] to activate.
  4. Press [�?] or [‚] to select [AF speed].
  5. Press [ENTER] to activate.
  6. Press [„] or [ƒ] to select [Fast / Normal].
  7. Press [MENU] to exit.

 

I would like to set the image mode

  1. Press [Picture] on the remote control to switch [Off / Neg / B&W].

 

I would like to freeze images

  1. Press [Freeze] on the remote control to freeze the current image on the display.

 

I would like to rotate the image

  1. Press [Mirror] on the remote control to switch [Off / Mirror / Flip / Mirror + Flip].

I would like to change the camera direction

  1. Press [L/R Direction Set] on the remote control to switch [L/R Direction / Normal].

I would like to display the current status

  1. Press [Info] on the remote control to display the current status information. `

I would like to reset to the default value

Reset to default value using OSD menu or Remote Control combination key

  • OSD menu: on the Remote Control and reset to the default value
  • Remote Control combination key: one by one on the Remote Control in order to reset to the default value
Creation date: 18/10/2019 10:27 (b.maertens@televic.com)      Updated: 18/10/2019 10:27 ()