avatar  


Recently viewed tickets

Log out

Configure D-Cerno using the web server

Parameters also accessible from the D-Cerno main menu

The following settings can be accessed on both the central unit and the web server. That’s why we will refer to "Configure general D-Cerno settings" on page 1 for the explanation of the different options.

Volume

After you successfully access the D-Cerno web server for the first time, you can change the volume settings of the central unit, directly from the web server. Change the volume using the slide bar.

Conference mode:

See "Configure conference modes" on page 1 for more information.

Vox settings

In the D-Cerno web server you can configure two additional settings which are not available on the central unit:

Parameter

Description

Last microphone Keep the last activated microphone active even when no sound is detected
Led indication Use microphone status LED to show that microphone is active

See "Configure VOX settings" on page 1 for more information on the other VOX settings.

Microphone preset

For more information see "Configure microphone settings" on page 1.

Maximum number of open microphones:

For more information see "Configure microphone settings" on page 1.

Eco mode

For more information see "Eco mode" on page 1

Factory settings

For more information see "Configure general D-Cerno settings" on page 1.

Headphone

For more information see "Headphone volume" on page 1.

Chime

For more information see "Chime" on page 1

N-1/external equalizer

For more information see "Configure external processing" on page 1.

Audio in

For more information see "Configure external processing" on page 1.

Audio out

For more information see "Configure external processing" on page 1.

Info

For more information see "Configure general D-Cerno settings" on page 1.

Settings only accessible via the web server

Record Settings

The encoding format and file name prefix can be changed in the record settings.

One minute of recording in WAV format takes about 4MB.

One minute of recording in MP3 format at 192kbps takes about 1.5MB.

Camera protocol

The “IP address�? is the destination IP address (UDP) and “Port�? is the destination port (UDP). For more information about the camera protocol string we refer to chapter 16.

Network settings

You can customize the TCP/IP setting to allow the D-Cerno central unit into your personal or company LAN network. When using multiple D-Cerno central units it is mandatory to choose different IPs to prevent conflicts. After clicking “Apply�? you need to restart the Central Unit by clicking the ON/OFF button and also change the IP address in your browser to the new IP address.

Language setting:

In the language setting you can select your preferred language to view the D-Cerno web server in.

Change password:

The default password is“1234�?, it is possible to change this in the screen displayed below.

Time & date settings

In the time and date settings window you can see the clock of your computer. This is not the clock of the D-Cerno CUR. If the timestamp that is added to the recorded files is not correct you can change the time and date by clicking Change date and time settings…. This way you have the correct timestamp.

System update

Here an update of the system can be performed. For a detailed description of the update procedure please see "Update D-Cerno" on page 1.

Creation date: 10/09/2019 14:13 (b.maertens@televic.com)      Updated: 16/10/2019 13:47 (b.maertens@televic.com)