avatar  


Recently viewed tickets

Log out

Record audio

The D-Cerno CU-R has 3 record buttons. With these buttons it is possible to start, stop or pause a recording from the central unit.

  • : Start recording
  • : Stop recording
  • : Play / pause recording

On the front of the central unit there is a possibility to connect two USB storage devices for direct recording of the meeting. For more information about the USB storage devices, please refer to "External Connections" on page 1.

The recording of a meeting can be saved as MP3 or WAV format.

The Central unit uses 2 USB ports so that the USB devices can take over from each other. If one USB device is full, the other one will take over. In the picture below you can see the different statuses of the USB devices. These are displayed on the central unit.

Idle

USB1 active

USB2 present + error

USB1 active

USB1 active + error

USB 2 active

USB2 active

USB1 active + error

USB2 present + error

USB 1 active

USB 2 present

USB1 present + error

USB2 active + error

USB 1 present

USB 2 active

USB1 full

USB 1 active

+ error

USB2 full

USB 2 active

+ error

USB1 full

USB2 active

USB1 active + error

USB2 present

USB1 active

USB2 full

USB 1 present

USB2 active + error

 

 

USB1 almost full

USB2 present

USB1 present

USB2 almost full

USB1 almost full

USB2 almost full

USB1 full

USB2 almost full

USB1 almost full

USB2 full

The recording can be started /stopped, played or paused from the central unit with the record buttons.

Record using the Web server

More advanced control is available through the web server:

Pause / stop or start a recording

A recording can be paused, stopped or started with these three buttons. You can also see how long ago a recording started.

Figure 1-20 Pause/ stop or start a recording

Content of devices:

With the web server it is possible to see on which USB device the recording is stored. In the left corner you can see the remaining time for recording on the USB device. This is automatically adjusted according to the used recording format. The size of the recording is displayed next to the recording.

Figure 1-21 Content of devices

Playback

Playing the recording file can be done by pressing on the recorded file.

Delete:

A recording can also be deleted by pressing on the delete button.

Figure 1-22 Figure 13.17: Delete a recording

Switch active USB device:

By using the switch button it is possible to switch between USB devices. This can be done before recording or when a recorded is started.

Figure 1-23 Switch USB device

 

Creation date: 10/09/2019 14:13 (b.maertens@televic.com)      Updated: 10/09/2019 14:13 ()