avatar  


Recently viewed tickets

Log out

Safety instructions

The safety instructions contain general safety guidelines that integrators, installers, operators, end-users, and anyone else who installs or uses Televic Conference material is required to read and follow at all times.

Safety

All Televic Conference systems are state of the art devices and have been designed to meet all quality standards. Nevertheless, the individual components of the conference system can cause danger for persons and material assets if

  • the conference system is not used as intended,
  • the conference system is set up by personnel not familiar with the safety regulations,
  • the conference system is converted or altered incorrectly,
  • the safety instructions are not observed.

FCC & ICES Information

(U.S.A and Canadian Models only).

This Class B digital apparatus complies with Canadian norm ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help
  • Consult the Federal Communications Commission’s manual “How to Identify and Resolve Radio-TV Interference Problems�?

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Televic Conference may void the FCC authorization to operate this equipment.

Conformity and Certification Info for Japan

This device has been granted a designation number by Ministry of Internal Affairs and Communications according to:

Ordinance concerning Technical Regulations Conformity Certification etc. of Specified Radio Equipment (特定無線設備�?�技術基準�?��?�証明等�?�関�?�る�?則)

Article 2 clause 1 item 19/3

Approval No.:

      • 202WW10120791/2
      • 202XW10120791/2
This device should not be modified, otherwise the granted designation number will be invalid.

Important safety instructions

  1. Read Instructions. All the safety and operating instructions should be read before the product, device or system is operated.
  2. Retain Instructions. The safety and operating instructions should be retained for future reference. The instructions should be kept in the vicinity of the product or system.
  3. Heed Warnings. All warnings on the product and the operating instructions should be closely adhered to.
  4. Follow Instructions. All instructions for installation or operating/use should be followed closely.
  5. Cleaning. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
  6. Ventilation. Any slots and openings in the device or equipment are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a chair, table, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
  7. Heat. The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Do not use or operate any equipment in environments that exceed the standard operating temperatures.
  8. Modifications. Do not use any modifications, extension, or other attachments not recommended by the product manufacturer as they may cause hazards.
  9. Accessories. Only use attachments/accessories specified by the manufacturer. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
  10. Water and Moisture. Do not use this product near water or in a humid environment.
  11. Moving. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
  12. Power Sources. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply of your room, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
  13. Power Lines. An outdoor system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.
  14. Grounding or Polarization. Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  15. Power-Cord Protection. Power-supply cords should be routed to that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, convenience receptacles, and the point where they exit from the product.
  16. Lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. (Not applicable when special functions are to be maintained, such as evacuation systems.)
  17. Overloading. Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock.
  18. Object and Liquid Entry. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
  19. Inflammable and Explosive Substance. Avoid using this product where there are gases, and also where there are inflammable and explosive substances in the immediate vicinity.
  20. Heavy Shock or Vibration. When carrying this product around, do not subject the product to heavy shock or vibration.
  21. Servicing. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
  22. Damage Requiring Service. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    1. When the power-supply cord or plug is damaged.
    2. If liquid has been spilled, or objects have fallen into the product.
    3. If the product has been exposed to rain or water.
    4. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
    5. If the product has been dropped or damaged in any way.
    6. When the product exhibits a distinct change in performance-this indicates a need for service.
  23. Replacement Parts. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
  24. Safety Check. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
  25. Coax Grounding. If an outside cable system is connected to the apparatus, be sure the cable system is grounded. U.S.A. models only: Section 810 of the National Electrical Code, ANSI/NFPA No.70-1981, provides information with respect to proper grounding of the mount and supporting structure, grounding of the coax to a discharge apparatus, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
  26. Eye exposure. Beware of permanent eye damage due to the infrared radiation. Permanent exposure is allowed at a distance of 50 cm (E=100 W/m² limit according to IEC62471 2006-2007 first edition). At distances below 10 cm (=for servicing, installation testing), limit is reached after 20 to 30 seconds. Take precautions : cover the LEDs during servicing/testing and limit the exposure time. Avoid looking directly into the LEDs and limit the exposure time. At distances between 10 to 50 cm : avoid looking directly into the LEDs and limit the exposure time.

Lithium batteries

DANGER

Electrical misuse

  • Only use the dedicated charging case to charge the battery
  • Do not charge the battery by an electric outlet directly or a cigarette lighter charger
  • Do not charge the battery reversely

Environmental misuse

  • Do not leave the battery near the fire or a heated source.
  • Do not throw the battery into the fire.
  • Do not leave, charge or use the battery in a place where the inside temperature may be over 60° C
  • Do not immerse, throw or submerge the battery in water

Other

  • Do not fold the battery cased with laminated film such as pouch and Polymer.
  • Do not store the battery in a pocket or a bag together with metallic objects such as keys, necklaces, hairpins, coins, or screws.
  • Do not short circuit (+) and (-) terminals with metallic objects intentionally.
  • Do not pierce the battery with a sharp object such as a needle or screw drivers.
  • Do not heat parts of the battery with heated objects such as soldering iron.
  • Do not hit battery with heavy objects such as a hammer.
  • Do not step on the battery and throw or drop the battery on a hard floor to avoid mechanical shock.
  • Do not disassemble the battery or modify the battery design including electric circuit.
  • Do not solder on the battery directly.
  • Do not use seriously damaged or deformed battery.
  • Do not put the battery into a microwave oven, dryer ,or high-pressure container.
  • Do not use or assemble the battery with other manufacterers' batteries, different types and/or models of batteries such as dry batteries, nickel-metal hydride batteries, or nickel-cadmium batteries.
  • Do not use or assemble old and new batteries together.
WARNING
  • Stop charging the battery if charging isn't completed within the specified time.
  • Stop using the battery if the battery becomes abnormally hot, order, discoloration, deformation, or abnormal conditions are detected during use, charge, or storage.
  • Keep away from fire immediately when leakage or foul odors are detected. If liquid leaks onto your skin or cloths, wash well with fresh water immediately.
  • If liquid leaking from the battery gets into your eyes, don't rub your eyes and wash them with clean water and go to see a doctor immediately.
  • If the terminals of the battery become dirty, wipe with a dry cloth before using the battery.
  • The battery can be used within the following temperature ranges. Don't exceed these ranges.
    • Charge temperature ranges : 0℃ ~ 45℃
    • Discharge Temperature ranges : -20℃ ~ 60℃
  • Store the battery at temperature below 60℃
  • Cover terminals with proper insulating tape before disposal.
CAUTION

Electrical misuse

  • Battery must be charged with constant current-constant voltage (CC/CV).
  • Charge current must be controlled by specified value in Cell specification.
  • Cut-off Voltage of charging must be 4.2V.
  • Charger must stop charging battery by detecting either charging time or current specified in Cell’s specification.
  • Discharge current must be controlled by specified value in Cell’s specification.
  • Cut-off Voltage of discharging must be over 2.5V.

Others

  • Before using the battery or charging case, read the user manual and precaution of its handling.
  • Replace the battery when using time of battery becomes much shorter than usual.
  • Cover terminals with insulating tape before proper disposal.
  • If the battery is needs to be stored for an long period, the battery should be removed from the application and stored in a place where humidity and temperature are low.
  • While the battery is charged, used and stored, keep it away from object materials with static electric chargers.

General conformity info

The Confidea Wireless Conference system complies with following standards:

  • EN60065
  • EN55103-1/-2
  • IEC60914

Power connections

For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the fixed wiring; For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

This label may appear on the bottom of the apparatus due to space limitations.

The lightning flash with an arrowhead symbol, with an equilateral triangle, is intended to alert the user to the presence of un-insulated ‘dangerous voltage’ within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not open the cabinet; refer servicing to qualified personnel only.
To prevent electric shock, do not use this (polarized) plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes.
Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes.
Creation date: 10/09/2019 11:16 (b.maertens@televic.com)      Updated: 16/10/2019 14:31 (j.callant@televic.com)